Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

LARRY,
I HAVE A KUBOTA 2710 THAT I PUT WHEEL WEIGHTS ON. THEY ARE 25 LB. WEIGHTS USED FOR WEIGHT LIFTING@$11.65 EA. THEY ALSO SELL 50 LB'S. A PLATE WAS MADE FOR THE INSIDE OF THE WHEEL WITH A 1" THREADED ROD IN THE CENTER. I TAKE THE LUG NUTS OFF, PUT THE PLATE OVER THE STUDS, PUT THE LUG NUTS BACK ON. THE WEIGHTS SLIDE OVER THE THREADED ROD AND TIGHTENED DOWN WITH A NUT ON THE END OF THE ROD. I PUT 200# ON EACH SIDE. WORKS NICE. CAN BE TAKEN OF IN ABOUT 30 SEC. JUST PUT A GOOD COAT OF PAINT ON THE WEIGHTS, AS THEY WILL RUST.
FRED

Wheel Weights or Everything About Air Compressors Oil vs Air based
John Deere Tractors
Replies 26 Post by FRED G.

STANLEY,
I HAVE A 2710 WHICH I PLAN TO PLOW WITH A GRADER BLADE AND LEAVE THE BUCKET ON.
I AM INSTALLING 25# WEIGHTS INSIDE THE WHEEL RIM JUST LIKE YOU DISCRIBE. THE MAX. I CAN PUT ON IS 25# X 6=150# PER WHEEL. I WOULD LIKE MORE. I WOULD SAY PUT ON AS MUCH AS YOU CAN. 6 PLATES FOR ME FIT INSIDE THE WHEEL RIM. THEY ARE 12" X 1.5" WITH A 1" BORE.LET ME KNOW HOW IT WORKS OUT.
FRED

Wheel weights for Kubota
Kubota Tractors
Replies 3 Post by FRED G.

I HAVE A KUBOTA 2710 AND WAS LOOKING FOR A CURTIS PLOW. MY BROTHER LIVES IN NJ AND SAID HIS BROTHER-IN-LAW HAD A FRONT PLOW FOR HIS TRACTOR. HE SAID IT ACTED LIKE A RUDDER IN DEEP SNOW 12

FRED "> Blade to replace front bucket
Snowblowers / Snow Plows
Replies 26 Post by FRED G.

I TOOK YOUR ADVICE AND CHECKED OUT THE WEB SITE TECH2TECH.<br>THE WRITER HAD VALADATED HIS STUDY IN ONE SENTENCE.<br>

NOW I'M CONFUSED AS TO WHAT THIS SITE IS TRYING TO DEMONSTRATE. WHO HAS THE BEST FILTER BASED ON A VISUAL STUDY? I WOULD RATHER MAKE MY DECISION BASED ON THE ACTUAL FILTERING ABILITY OF THE FILTER. BE IT A $2.50 FILTER OR A $10.00 FILTER.WOULD YOU PICK YOUR WIFE THAT YOU INTEND TO SPEND THE REST OF YOUR LIFE WITH AND RAISE YOUR CHILDREN FROM A LINE-UP OF 10 FEMALES AND DECIDE ON LOOKS ALONE? LIKE mls SAID. IT'S YOUR MONEY.
FRED G. "> Oil Filter
Parts and Repair
Replies 38 Post by FRED G.